照片为代表

014670

Eaton Moeller® series T0 Changeover switch, 20 A, rear mounting, Basic switch, 5 contact units, Contacts: 9, 90 °, Design number 8043

产品规格

规格资源

常用规格

Product Name	Eaton Moeller® series T0 Changeover switch
Catalog Number	014670
Product Length/Depth	86 mm
Product Height	48 mm
Product Width	48 mm
Product Weight	0.166 kg
Certifications	CE

产品规格

10.10 Temperature rise	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating	Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.12 Electromagnetic compatibility	Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical function	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
10.2.2 Corrosion resistance	Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures	Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat	Meets the product standard's requirements.
10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects	Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation	UV resistance only in connection with protective shield.
10.2.5 Lifting	Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact	Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions	Meets the product standard's requirements.
10.3 Degree of protection of assemblies	Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances	Meets the product standard's requirements.
10.5 Protection against electric shock	Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components	Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections	Is the panel builder's responsibility.
10.8 Connections for external conductors	Is the panel builder's responsibility.
10.9.2 Power-frequency electric strength	Is the panel builder's responsibility.
10.9.3 Impulse withstand voltage	Is the panel builder's responsibility.
10.9.4 Testing of enclosures made of insulating material	Is the panel builder's responsibility.
Fitted with:	0 (off) position Control unit
Pollution degree	3
Enclosure material	Plastic
Number of contact units	5
Device construction	Intermediate mounting
Electrical connection type of main circuit	Screw connection
Mounting position	As required
Mounting method	Rear mounting
Overvoltage category	III
Degree of protection	IP56 NEMA 2
Number of contacts	9
Functions	Measuring between phase and N-neutral possible
Rated operational current (Ie) at AC-21, 440 V	20 A
Switching angle	90 °