118560

Eaton Moeller® series DIL-SWD Function element, contactor, SmartWire-DT, DIL/MSC

产品规格

规格资源

常用规格

Product Name	Eaton Moeller® series DIL-SWD SWD contactor module
Catalog Number	118560
Product Length/Depth	72 mm
Product Height	38 mm
Product Width	45 mm
Product Weight	0.04 kg
Certifications	CSA File No.: 2324643 CSA Class No.: 3211-07 CSA-C22.2 No. 14-05 UL UL File No.: E29184 CSA IEC/EN 61131-2 UL Category Control No.: NKCR CE EN 50178 IEC/EN 60947 IEC/EN 60947-4-1 UL 508

产品规格

Type	SWD contactor modules
Features	Fieldbus connection over separate bus coupler possible
Air discharge	8 kV, according to IEC 61131-2, level 3, ESD
10.10 Temperature rise	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating	Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.12 Electromagnetic compatibility	Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical function	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
10.2.2 Corrosion resistance	Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures	Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat	Meets the product standard's requirements.
10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects	Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation	Meets the product standard's requirements.
10.2.5 Lifting	Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact	Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions	Meets the product standard's requirements.
10.3 Degree of protection of assemblies	Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances	Meets the product standard's requirements.
10.5 Protection against electric shock	Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components	Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections	Is the panel builder's responsibility.
10.8 Connections for external conductors	Is the panel builder's responsibility.
10.9.2 Power-frequency electric strength	Is the panel builder's responsibility.
10.9.3 Impulse withstand voltage	Is the panel builder's responsibility.
10.9.4 Testing of enclosures made of insulating material	Is the panel builder's responsibility.
Electric connection type	Spring clamp connection
Fitted with:	Own supply
Number of inputs (digital)	2
Pollution degree	2
Burst impulse	1 kV, Signal cable, according to IEC/EN 61131-2, Level 3 1 kV, SmartWire-DT cable, according to IEC/EN 61131-2, Level 3
Addressing	Address set automatically
Connection to SmartWire-DT	Yes
Category (EN 954-1)	1
Explosion safety category for dust	None
Environmental conditions	Condensation: prevent with appropriate measures
Explosion safety category for gas	None
Output current	0.5 A
Current consumption	40 mA, SmartWire-DT network
Voltage type	DC
Mounting position	As DILM7 to DILM38
Contact discharge	4 kV, according to IEC/EN 61131-2, Level 2, ESD
Overvoltage category	II
Safety performance level (EN ISO 13849-1)	None
SIL (IEC 61508)	None
Ambient operating temperature - max	60 °C
Ambient operating temperature - min	-25 °C
Ambient storage temperature - max	70 °C
Ambient storage temperature - min	30 °C
Equipment heat dissipation, current-dependent Pvid	0 W
Heat dissipation capacity Pdiss	0 W
Heat dissipation per pole, current-dependent Pvid	0 W
Height of fall (IEC/EN 60068-2-32) - max	0.3 m
Input current at signal 1	3 mA
Number of auxiliary contacts	2
Number of HW-interfaces (industrial ethernet)	0
Number of HW-interfaces (other)	1
Number of HW-interfaces (parallel)	0
Number of HW-interfaces (RS-232)	0
Number of HW-interfaces (RS-422)	0
Number of HW-interfaces (RS-485)	0
Number of HW-interfaces (serial TTY)	0
Number of HW-interfaces (USB)	0
Constant acceleration	1 g, 8.4 - 150 Hz, according to IEC/EN 61131-2, Vibrations
Constant amplitude	3,5 mm, 5 - 8.4 Hz, according to IEC/EN 61131-2, Vibrations
Potential isolation	Connection auxiliary contact: no
Cable length	≤ 2.8 m, Connection auxiliary contact
Electromagnetic fields	1 V/m at 2.0 - 2.7 GHz (according to IEC/EN 61131-2:2008) 10 V/m at 80 - 1000 MHz (according to IEC/EN 61131-2:2008) 3 V/m at 1.4 - 2 GHz (according to IEC/EN 61131-2:2008)
Radiated RFI	10 V (IEC/EN 61131-2:2008, Level 3)
Drop and topple	50 mm Drop height, Drop to IEC/EN 60068-2-31
Protocol	Other bus systems
Radio interference class	Class A (EN 55011)
Number of outputs (digital)	1
Relative humidity	5 - 95 % (non-condensing, IEC/EN 60068-2-30)
Pick-up current	500 mA (for DILM 17-38) 188 mA (for DILM 12-15) 125 mA (for DILM 7-9)
Connection type	Push in terminals, Auxiliary contact SWD: Plug, 8-pole External device plug SWD4-8SF2-5, SmartWire-DT
Data transmission type	None
Rated operational voltage	15 V DC (auxiliary contact)
Degree of protection	IP20
Station	SmartWire-DT slave, SmartWire-DT network
Shock resistance	15 g, Mechanical, according to IEC/EN 60068-2-27, Half-sinusoidal shock 11 ms, 9 Impacts
Functions	Contactor actuation Display of Switch status Contactor, status of the digital inputs 1 and 2 For connecting the contactors to SmartWire-DT
System accessory	Yes
Terminal capacity	0.2 - 1.5 mm² (24 - 16 AWG), solid 0.25 - 1.5 mm², flexible with ferrule
LED indicator	Status indication of SmartWire-DT network: Green and orange LED
Power consumption	3 W for DILM 7-9 (Pick-up power) 4.5 W for DILM 12-15 (Pick-up power) 4.5 W for DILM 12-15 (Sealing power) 12 W for DILM 17-38 (Pick-up power) 3 W for DILM 7-9 (Sealing power) 0.5 W for DILM 17-38 (Sealing power)
Number of HW-interfaces (wireless)	0
Number of interfaces (PROFINET)	0
Permitted voltage at input - max	15 V
Permitted voltage at input - min	15 V
Permitted voltage at output - max	28.8 V
Permitted voltage at output - min	20.4 V
Rated operational current for specified heat dissipation (In)	0 A
Static heat dissipation, non-current-dependent Pvs	0.8 W
Supply voltage at AC, 50 Hz - max	0 VAC
Supply voltage at AC, 50 Hz - min	0 VAC
Supply voltage at AC, 60 Hz - max	0 VAC
Supply voltage at AC, 60 Hz - min	0 VAC
Supply voltage at DC - max	15 VDC
Supply voltage at DC - min	15 VDC
Time delay at signal exchange - max	84 ms
Time delay at signal exchange - min	10 ms
Product category	SmartWire-DT slave
Sealing current	125 mA, SmartWire-DT network for DILM 7-9 21 mA, SmartWire-DT network for DILM 17-38 188 mA, SmartWire-DT network for DILM 12-15