229413

Eaton Moeller series NZM Shunt release, for capacitor unit

规格资源

常用规格

Product Name	Eaton Moeller series NZM Shunt release
Catalog Number	229413
Product Length/Depth	100 mm
Product Height	114 mm
Product Width	74 mm
Product Weight	0.48 kg
Compliances	IEC RoHS conform

产品规格

Used with	NZM2(-4), N(S)2(-4) NZM3(-4), N(S)3(-4) NZM1(-4), N(S)1(-4) NZM4(-4), N(S)4(-4)
10.10 Temperature rise	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating	Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.12 Electromagnetic compatibility	Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical function	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
10.2.2 Corrosion resistance	Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures	Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat	Meets the product standard's requirements.
10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects	Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation	Meets the product standard's requirements.
10.2.5 Lifting	Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact	Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions	Meets the product standard's requirements.
10.3 Degree of protection of assemblies	Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances	Meets the product standard's requirements.
10.5 Protection against electric shock	Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components	Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections	Is the panel builder's responsibility.
10.8 Connections for external conductors	Is the panel builder's responsibility.
10.9.2 Power-frequency electric strength	Is the panel builder's responsibility.
10.9.3 Impulse withstand voltage	Is the panel builder's responsibility.
10.9.4 Testing of enclosures made of insulating material	Is the panel builder's responsibility.
Electric connection type	Screw connection
Frame	NZM1/2/3/4
Pollution degree	3
Number of contacts (normally open contacts)	0
Rated control supply voltage (Us) at AC, 50 Hz - max	230 V
Rated control supply voltage (Us) at AC, 50 Hz - min	230 V
Rated control supply voltage (Us) at AC, 60 Hz - max	230 V
Rated control supply voltage (Us) at AC, 60 Hz - min	230 V
Voltage rating at AC	230 V AC
Suitable for	Off-load switch
Voltage type	DC
Overvoltage category	III
Rated operation current (Ie)	< 10 mA 3 A
Terminal capacity (solid/flexible conductor)	20 - 14 AWG (1x) with ferrule 0.5 mm² - 2.5 mm² (1x) for undervoltage releases, off-delayed with ferrule 0.5 mm² - 2.5 mm² (1x) at shunt release with ferrule 20 - 16 AWG (2x) with ferrule
Type	Accessory Shunt release Shunt release for capacitor unit
Special features	Capacitor unit 230 V 50/60 Hz in conjunction with NZM...-XA208-250 AC/DC shunt release Enclosure: degree of protection IP20 not UL/CSA approved Enables the safe use of circuit-breakers as mesh network circuit-breakers in the range from 0 – 110 % Un with constant switch-off time of 40 ms. If the mains voltage is absent, the installed capacitor supplies power for actuating the shunt release for at least 12 hours. The configuration of the capacitor unit is undertaken independently of the circuit-breaker. Connect capacitor unit to the supply side! Engineering Guidelines: Connect a standard auxiliary contact as N/O in series with the shunt release! Standard auxiliary contact not included as standard.
Rated control supply voltage (Us) at DC - max	0 V
Rated control supply voltage (Us) at DC - min	0 V
Rated impulse withstand voltage of auxiliary contacts	8000 V
Rated impulse withstand voltage of main contacts	8000 V
Number of contacts (normally closed contacts)	0
Number of contacts (change-over contacts)	0
Undelayed short-circuit release - min	0 A
Undelayed short-circuit release - max	0 A