发送电子邮件
照片为代表
Download
Eaton S811 Soft starter, 105 A, 200 - 600 V AC, Us= 24 V DC, with control unit, Frame size R
| Product Name |
Eaton S811 Soft starter
|
| Catalog Number |
168980
|
| Product Length/Depth |
168.6 mm
|
| Product Height |
201.2 mm
|
| Product Width |
111.3 mm
|
| Product Weight |
4.8 kg
|
| Compliances |
CE Marked
|
| Certifications |
CSA file No. 3211-06
UL Recognized EN 60947-4-2 IEC 60947-4-2 UL Listed CSA Certified for Elevator Duty CSA Class No.: 3211-06, 2411-01 UL 508 CSA-C22.2 No. 14 UL Category Control No.: NMFT CSA GB14048 UL CE CCC CSA File No.: LR 353 IEC/EN 60947-4-2 UL File No.: E202571 C-Tick CSA22.2-14-1995 |
| Used with |
Three-phase motors
|
| Amperage Rating |
1000A
|
| Display material |
LCD
|
| AC current - max |
240 Vac
|
| DC current - max |
120 Vdc
|
| Number of poles |
Three-pole
|
| Type |
Soft starter for three-phase loads, with control unit
|
| 10.10 Temperature rise |
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
|
| 10.11 Short-circuit rating |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.12 Electromagnetic compatibility |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.13 Mechanical function |
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
|
| 10.2.2 Corrosion resistance |
Meets the product standard's requirements.
|
| 10.2.3.1 Verification of thermal stability of enclosures |
Meets the product standard's requirements.
|
| 10.2.3.2 Verification of resistance of insulating materials to normal heat |
Meets the product standard's requirements.
|
| 10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects |
Meets the product standard's requirements.
|
| 10.2.4 Resistance to ultra-violet (UV) radiation |
Meets the product standard's requirements.
|
| 10.2.5 Lifting |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.6 Mechanical impact |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.7 Inscriptions |
Meets the product standard's requirements.
|
| 10.3 Degree of protection of assemblies |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.4 Clearances and creepage distances |
Meets the product standard's requirements.
|
| 10.5 Protection against electric shock |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.6 Incorporation of switching devices and components |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.7 Internal electrical circuits and connections |
Is the panel builder's responsibility.
|
| 10.8 Connections for external conductors |
Is the panel builder's responsibility.
|
| 10.9.2 Power-frequency electric strength |
Is the panel builder's responsibility.
|
| 10.9.3 Impulse withstand voltage |
Is the panel builder's responsibility.
|
| 10.9.4 Testing of enclosures made of insulating material |
Is the panel builder's responsibility.
|
| Fitted with: |
Internal bypass contacts
Display Internal bypass Motor overload protection |
| Frequency rating |
47-63 Hz
|
| Pollution degree |
3
|
| Class |
Adjustable
|
| Climatic proofing |
Damp heat, cyclic, to IEC 60068-2-30
Damp heat, constant, to IEC 60068-2-3 |
| Connection to SmartWire-DT |
No
|
| Power supply |
24 V
|
| Rated impulse withstand voltage (Uimp) |
4000 V
|
| Frame size |
R
|
| Altitude |
Above 2000 m with 0.5 % derating per 100 m
Max. 2000 m |
| Number of inputs |
1 (current input)
|
| Ambient operating temperature - max |
50 °C
|
| Ambient operating temperature - min |
-30 °C
|
| Ambient storage temperature - max |
70 °C
|
| Ambient storage temperature - min |
-50 °C
|
| Assigned motor power at 200/208 V, 60 Hz, 3-phase |
30 HP
|
| Assigned motor power at 220/230 V, 60 Hz, 3-phase |
40 HP
|
| Assigned motor power at 460/480 V, 60 Hz, 3-phase |
75 HP
|
| Assigned motor power at 600 V, 60 Hz, 3-phase |
100 HP
|
| Assigned motor power in-delta at 220/230 V, 60 Hz |
60 HP
|
| Assigned motor power in-delta at 460/480 V, 60 Hz |
150 HP
|
| Assigned motor power in-delta at 575/600 V, 60 Hz |
150 HP
|
| Equipment heat dissipation, current-dependent Pvid |
25 W
|
| Heat dissipation capacity Pdiss |
0 W
|
| Heat dissipation per pole, current-dependent Pvid |
0 W
|
| Mains voltage - max |
600 V
|
| Mains voltage - min |
200 V
|
| Operating temperature - max |
50 °C
|
| Communication |
Modbus RTU
|
| NEMA rating |
NEMA 0
|
| Output voltage |
120 V AC/DC (relay outputs)
|
| Number of outputs |
2 Relay Outputs (programmable)
|
| Screwdriver size |
0.6 x 3.5 mm, Terminal screws, Control circuit cables
4 mm Hexagon socket-head screw, Terminal screw, Main cables |
| Voltage type |
DC
|
| Rated operational voltage (Ue) - min |
200 V
|
| Rated power three-phase motor, inline, at 230 V |
30 kW
|
| Rated power three-phase motor, inline, at 400 V |
55 kW
|
| Rated power three-phase motor, inside delta, at 230 V |
55 kW
|
| Rated power three-phase motor, inside delta, at 400 V |
90 kW
|
| Static heat dissipation, non-current-dependent Pvs |
25 W
|
| Voltage rating - max |
600 V
|
| Application |
|
| Protection |
Finger and back-of-hand proof, Protection against direct contact
|
| Size |
NEMA 0
|
| Mounting position |
As required
|
| Input current |
4 - 20 mA (Analog inputs)
|
| Operating voltage |
200-600 V
|
| Wire size |
#22-14 AWG
|
| Drop-out voltage |
0 - 3 V, DC operated
|
| Overvoltage category |
II
|
| Module interface |
Digital interface module
|
| Degree of protection |
IP20
NEMA Other |
| Current consumption |
150 mA, Control circuit, Digital inputs, External 24 V
1000 mA, Control circuit, Regulator supply 100 mA, Control circuit, Digital inputs, External 24 V (no-load) 10 A/150 ms, Control circuit, Regulator supply at peak performance (close bypass) at 24 V DC |
| Functions |
Suppression of DC components for motors
Min. ramp time 1 s - fast switching (semiconductor contactor) Soft start function Current limitation Suppression of closing transients Overload monitoring Underload monitoring Single direction Potential isolation between power and control sections |
| Delay time |
0 - 60 s, Soft start function, Ramp times
|
| Overload cycle |
AC-53a: 4.0 - 32: 99 - 3
|
| Drop-out time |
100 ms, DC operated
|
| Pick-up voltage |
21.6 - 26.4 V DC
|
| Radio interference class |
Class A (EN 55011)
|
| Fault memory |
10 Faults
|
| Pick-up time |
100 ms at DC
|
| Interfaces |
Modbus RTU (built-in)
|
| Kickstart |
Max. 2000 ms (Kickstart Duration)
100% (Kickstart voltage) |
| Rated control voltage (Uc) |
24 V DC (-10 %/+10 %)
24 V DC |
| Supply frequency |
50/60 Hz, fLN, Main circuit
|
| Terminal capacity (stranded) |
1 x (2.5 - 95) mm², Main cables
2 x (1 - 2.5) mm², Control circuit cables 1 x (2.5 - 4) mm², Control circuit cables |
| Operating temperature - min |
-30 °C
|
| Rated control supply voltage (Us) at AC, 50 Hz - max |
0 V
|
| Rated control supply voltage (Us) at AC, 50 Hz - min |
0 V
|
| Rated control supply voltage (Us) at AC, 60 Hz - max |
0 V
|
| Rated control supply voltage (Us) at AC, 60 Hz - min |
0 V
|
| Rated control supply voltage (Us) at DC - max |
24 V
|
| Rated control supply voltage (Us) at DC - min |
24 V
|
| Rated insulation voltage (Ui) |
660 V
|
| Rated operational current (Ie) at AC-11 |
3 A
|
| Rated operational current (Ie) at AC-53 |
105 A
|
| Rated operational current (Ie) at AC-53, in-delta |
182 A
|
| Rated operational current for specified heat dissipation (In) |
105 A
|
| Rated operational power at 220/230 V, 50 Hz |
30 kW
|
| Rated operational power at 400 V, 50 Hz |
55 kW
|
| Rated operational power at 500 V, 50 Hz |
55 kW
|
| Rated operational power in-delta at 220/230 V, 50 Hz |
55 kW
|
| Rated operational power in-delta at 400 V, 50 Hz |
90 kW
|
| Rated operational power in-delta at 500 V, 50 Hz |
110 kW
|
| Rated operational voltage (Ue) - max |
600 V
|
| Ramp/run-up time |
180 s
|
| Shock resistance |
15 g, Mechanical
|
| Suitable for |
Branch circuits, not as BCPD, (UL/CSA)
|
| Tightening torque |
11.3 Nm
0.4 Nm, Screw terminals, Control circuit cables |
| Short-circuit protection rating |
NZMN2-S125, Type “1” coordination, Main conducting paths
|
| Start voltage |
Max. 85 %, Soft start function, Start voltage = turn-off voltage
|
| Startup class |
CLASS 10 (star-delta replacement)
CLASS 20 (heavy starting duty 3 x Iₑ for 45 s) CLASS 30 (6 x Iₑ for 30 s) |
| Terminal capacity (flexible with ferrule) |
1 x (2.5 - 4) mm², Control circuit cables
1 x (2.5 - 95) mm², Main cables 2 x (1 - 2.5) mm², Control circuit cables |
| Terminal capacity (solid) |
1 x (2.5 - 4) mm², Control circuit cables
2 x (1 - 2.5) mm², Control circuit cables 1 x (2.5 - 95) mm², Main cables |
| Terminal capacity (solid/stranded AWG) |
1 x (14 - 12), Control circuit cables
1 x (14 - 4/0), Main cables 2 x (14 - 12), Control circuit cables |
产品规格
