Eaton Moeller® series PKE65 Motor-protective circuit-breaker, Type E DOL starters (complete devices), Electronic, 8 - 32 A, Turn button, Screw connection, North America
| Product Name |
Eaton Moeller® series PKE System-protective circuit-breaker
|
| Catalog Number |
170483
|
| Product Length/Depth |
198 mm
|
| Product Height |
204 mm
|
| Product Width |
55 mm
|
| Product Weight |
1.607 kg
|
| Certifications |
CSA-C22.2 No. 14-10
UL60947-4-1A UL Category Control No.: NKJH UL CSA File No.: 012528 IEC/EN 60947-4-1 CSA CSA Class No.: 3211-08 VDE 0660 CE UL File No.: E123500 |
| Catalog Notes |
This is a product for Environment A (Industrial). In environment B (household) this device may cause undesirable radio interference. In this case the user may be obliged to take appropriate measures.
|
| 10.10 Temperature rise |
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
|
| 10.11 Short-circuit rating |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.12 Electromagnetic compatibility |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.13 Mechanical function |
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
|
| 10.2.2 Corrosion resistance |
Meets the product standard's requirements.
|
| 10.2.3.1 Verification of thermal stability of enclosures |
Meets the product standard's requirements.
|
| 10.2.3.2 Verification of resistance of insulating materials to normal heat |
Meets the product standard's requirements.
|
| 10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects |
Meets the product standard's requirements.
|
| 10.2.4 Resistance to ultra-violet (UV) radiation |
Meets the product standard's requirements.
|
| 10.2.5 Lifting |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.6 Mechanical impact |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.7 Inscriptions |
Meets the product standard's requirements.
|
| 10.3 Degree of protection of assemblies |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.4 Clearances and creepage distances |
Meets the product standard's requirements.
|
| 10.5 Protection against electric shock |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.6 Incorporation of switching devices and components |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.7 Internal electrical circuits and connections |
Is the panel builder's responsibility.
|
| 10.8 Connections for external conductors |
Is the panel builder's responsibility.
|
| 10.9.2 Power-frequency electric strength |
Is the panel builder's responsibility.
|
| 10.9.3 Impulse withstand voltage |
Is the panel builder's responsibility.
|
| 10.9.4 Testing of enclosures made of insulating material |
Is the panel builder's responsibility.
|
| Pollution degree |
3
|
| Connection to SmartWire-DT |
No
|
| Actuator type |
Turn button
|
| Adjustment range undelayed short-circuit release - max |
0 A
|
| Adjustment range undelayed short-circuit release - min |
0 A
|
| Ambient operating temperature - max |
55 °C
|
| Ambient operating temperature - min |
-25 °C
|
| Assigned motor power at 200/208 V, 60 Hz, 3-phase |
7.5 HP
|
| Assigned motor power at 230/240 V, 60 Hz, 3-phase |
7.5 HP
|
| Assigned motor power at 460/480 V, 60 Hz, 3-phase |
20 HP
|
| Assigned motor power at 575/600 V, 60 Hz, 3-phase |
25 HP
|
| Equipment heat dissipation, current-dependent Pvid |
5.4 W
|
| Heat dissipation capacity Pdiss |
0 W
|
| Heat dissipation per pole, current-dependent Pvid |
1.8 W
|
| Rated impulse withstand voltage (Uimp) |
6000 V AC
|
| Device construction |
Built-in device fixed built-in technique
|
| Connection |
Screw terminals
|
| Electrical connection type of main circuit |
Screw connection
|
| Current flow times - min |
500 (Class 5) AC-4 cycle operation, Main conducting paths
700 (Class 10) AC-4 cycle operation, Main conducting paths 1000 (Class 20) AC-4 cycle operation, Main conducting paths For all combinations with an SWD activation, you need not adhere to the minimum current flow times and minimum cut-out periods. 900 (Class 15) AC-4 cycle operation, Main conducting paths Note: Going below the minimum current flow time can cause overheating of the load (motor). |
| Overvoltage category |
III
|
| Cut-out periods - min |
≤ 500 ms, main conducting paths, AC-4 cycle operation
|
| Degree of protection |
IP20
|
| Number of poles |
Three-pole
|
| Type |
Type E DOL starter (complete device)
|
| Functions |
Phase failure sensitive
|
| Overload release current setting - max |
32 A
|
| Overload release current setting - min |
8 A
|
| Rated operational voltage (Ue) - max |
690 V
|
| Rated operational voltage (Ue) - min |
690 V
|
| Rated operational current for specified heat dissipation (In) |
32 A
|
| Rated operational power at AC-3e, 220/230 V, 50 Hz |
7.5 kW
|
| Rated operational power at AC-3e, 380/400 V, 50 Hz |
15 kW
|
| Rated uninterrupted current (Iu) |
32 A
|
| Static heat dissipation, non-current-dependent Pvs |
0 W
|
| Rated short-circuit breaking capacity Icu at 400 V AC |
50 kA
|
| Rated short-circuit breaking capacity Ics at 400 V AC |
12 kA
|
| Rated short-circuit breaking capacity Icu at 440 V AC |
45 kA
|
| Rated short-circuit breaking capacity Ics at 440 V AC |
11 kA
|
| Rated short-circuit breaking capacity Icu at 500 V AC |
15 kA
|
| Rated short-circuit breaking capacity Ics at 500 V AC |
3 kA
|
| Rated short-circuit breaking capacity Icu at 690 V AC |
5 kA
|
| Rated short-circuit breaking capacity Ics at 690 V AC |
1 kA
|
| Short-circuit release |
448 A, Non-delayed
|
| Short-circuit current rating (type E) |
65 kA, 480 Y/277 V, SCCR (UL/CSA)
65 kA, 240 V, SCCR (UL/CSA) 25 kA, 600 Y/347 V, SCCR (UL/CSA) |
| Switch off technique |
Electronic
|
| Power loss |
5.4 W
|
| Resistance per pole |
2.2 mΩ
|
发送电子邮件
产品规格
