191082

Eaton XC XC303 modular PLC, small PLC, programmable CODESYS 3, SD Slot, Ethernet, CAN

产品规格

规格资源

常用规格

Product Name	Eaton XC Modular PLC
Catalog Number	191082
Product Length/Depth	108 mm
Product Height	65 mm
Product Width	85 mm
Product Weight	0.28 kg
Certifications	CE EN 61131 UL listed EAC UL File No.: E205091 cULus Listed
Catalog Notes	Protective devices must be installed directly at the inductive load in order to prevent interference.

产品规格

Type	Modular PLC XC300
Features	Short-circuit protection (digital outputs)
Air discharge	8 kV/4 kV, Air/contact discharge, ESD
10.10 Temperature rise	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating	Is the panel builder's responsibility.
10.12 Electromagnetic compatibility	Is the panel builder's responsibility.
10.13 Mechanical function	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
10.2.2 Corrosion resistance	Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures	Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat	Meets the product standard's requirements.
10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects	Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation	Meets the product standard's requirements.
10.2.5 Lifting	Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact	Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions	Meets the product standard's requirements.
10.3 Degree of protection of assemblies	Meets the product standard's requirements.
10.4 Clearances and creepage distances	Meets the product standard's requirements.
10.5 Protection against electric shock	Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components	Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections	Is the panel builder's responsibility.
10.8 Connections for external conductors	Is the panel builder's responsibility.
10.9.2 Power-frequency electric strength	Is the panel builder's responsibility.
10.9.3 Impulse withstand voltage	Is the panel builder's responsibility.
10.9.4 Testing of enclosures made of insulating material	Is the panel builder's responsibility.
Pollution degree	2
Burst impulse	1 kV, Signal cable 2 kV, Supply cable
Climatic proofing	Damp heat, constant, to IEC 60068-2-3 Dry heat to IEC 60068-2-2
Air pressure	795 - 1080 hPa (operation)
Explosion safety category for dust	None
Environmental conditions	Condensation: prevent with appropriate measures
Explosion safety category for gas	None
Output current	0.5 A
Mounting method	Rail mounting possible
Voltage type	DC
Mounting position	Vertical (on horizontal top-hat rail)
Memory capacity	512,000 kByte
Number of channels	4, Digital Outputs
Safety performance level (EN ISO 13849-1)	None
SIL (IEC 61508)	None
Ambient operating temperature - max	55 °C
Ambient operating temperature - min	-20 °C
Ambient storage temperature - max	80 °C
Ambient storage temperature - min	-40 °C
Height of fall (IEC/EN 60068-2-32) - max	1 m
Number of HW-interfaces (industrial ethernet)	0
Number of HW-interfaces (other)	1
Number of HW-interfaces (parallel)	0
Number of HW-interfaces (RS-232)	0
Number of HW-interfaces (RS-422)	0
Number of HW-interfaces (RS-485)	0
Number of HW-interfaces (USB)	0
Number of HW-interfaces (wireless)	0
Number of interfaces (PROFINET)	0
Number of outputs (analog)	0
Overvoltage category	II
Surge rating	0.5/0.5 kV, Supply cable, balanced/unbalanced), EMC 1 kV, Signal cable, unbalanced, EMC
Emitted interference	40 dB (at 30 - 230 MHz, Class A, radiated, high frequency) 47 dB (at 230 - 1000 MHz, Class A, radiated, high frequency)
Terminal capacity (AWG)	24 - 16
Electromagnetic fields	10 V/m at 0.08 - 1.0 GHz (according to IEC EN 61000-4-3) 1 V/m at 2 - 2.7 GHz (according to IEC EN 61000-4-3) 3 V/m at 1.4 - 2 GHz (according to IEC EN 61000-4-3)
Load current	Max. 6 A per 1.5 mm² (cross-sectional area)
Number of inputs (analog)	0
Connection type	Push-in spring-cage terminal, Connection design in TOP direction
Radiated RFI	10 V
Memory type	RAM
Number of outputs (digital)	0
Relative humidity	< 95 % (non-condensing)
Degree of protection	IP20
Number of relay outputs	0
Delay time	200 µs, Digital outputs, Delay on signal change and resistive load, from Low to High signal 200 µs, Digital outputs, Delay on signal change and resistive load, from High to Low signal
Protocol	MODBUS CAN Other bus systems TCP/IP EtherNet/IP
Digital outputs	Note: Protective devices must be installed directly at the inductive load in order to prevent interference.
Rated operational current (Ie)	2.8 A (supply input)
Heat dissipation	0.05 W (Digital inputs according to EN61131-2 Type 1, per active channel) 0.1 W (Digital outputs, internal, per active channel)
Functions	Redundancy Additional program memory possible
Gauge pin	A1 (according to IEC/EN 60947-1)
Vibration resistance	5 - 8.4 / 8.4 -150 Hz, 3,5 mm / 1 g
Input current	≥ 2.3 mA (Digital inputs, high level) 2 mA (Ie) ≤ 1.1 mA (Digital inputs, low level)
Input delay	300 µs (rising edge) 300 µs (falling edge)
Shock resistance	15 g, Mechanical, according to IEC/EN 60068-2-27, Half-sinusoidal shock 11 ms, 9 Impacts
Input voltage	15 - 30 V (Digital inputs, high level) 24 V DC (Digital inputs) 0 - 5 V (Digital inputs, low level)
Number of time switches - max	1000
Processing time	0.001 ms
Static heat dissipation, non-current-dependent Pvs	8 W
Stripping length (main cable)	10 mm
Supply voltage at AC, 50 Hz - max	0 VAC
Supply voltage at AC, 50 Hz - min	0 VAC
Supply voltage at AC, 60 Hz - max	0 VAC
Supply voltage at AC, 60 Hz - min	0 VAC
Supply voltage at DC - max	30 VDC
Supply voltage at DC - min	18 VDC
Heat dissipation details	The max. heat dissipation is specified as the maximum power produced inside the device's housing.
Insulating material group	I
Terminal capacity (flexible)	0.2 - 1.5 mm², H 07V-K
System accessory	Yes
Model	Modular
Utilization factor	100 % (Ʃ IAmax = 2A)
Potential isolation	Between Digital inputs: no Between Digital outputs: no
Number of inputs (digital)	0
Voltage dips	Voltage dips: 10 ms/Voltage fluctuations: Yes
Rated operational voltage	24 V 160 V (terminations)
Terminal capacity	0.25 - 0.75 mm², with ferrules with plastic collar according to DIN 46228-1 (ferrules crimped gas-tight)
Terminal capacity (flexible with ferrule)	0.25 - 1.5 mm², with ferrules without plastic collar according to DIN 46228-1 (ferrules crimped gas-tight) 0.25 - 1.5 mm², with ferrules with plastic collar according to DIN 46228-1 (ferrules crimped gas-tight)
Terminal capacity (solid)	0.2 - 1.5 mm², H07V-U