Considered the most efficient mechanically cleaned filter on the market, the Eaton DCF-Series is ideal for highly viscous, abrasive, or sticky liquids. The DCFs operate at a consistently low differential pressure and deliver simple, reliable operation in which a low initial investment is a key driving factor.
Applications:
DCF mechanically cleaned filters are designed to address the challenges of increasing environmental pressures, loss of valuable produce, and operator safety.
MCF
MCF 824
MCS 500
Spare Parts Bag Filter Housings
DCF 400 | DCF 800 | DCF 1600 | |
Single Unit Weight | 35 lbs (16 kg) | 75 lbs (34 kg) | 215 lbs (97.5 kg) |
Service Height | 61.25 in (1,556 mm) | 69.25 in (1,760 mm) | 102 in (2,591 mm) |
Total Volumetric Capacity | 0.94 gal (3.5 liters) | 3.9 gal (14.8 liters) | 11 gal (41.6 liters) |
Purge Chamber Capacity | 0.06 gal (0.23 liters) | 0.24 gal (0.91 liters) | 0.66 gal (2.5 liters) |
Filtration Surface Area | 112 in², 722 cm² | 264 in², 1,703 cm² | 610 in², 3,935 cm² |
Flow Rate Range at 100μm | 2–15 gpm, 0.45–3.4 m³/hr | 20–60 gpm, 4.5–13.6 m³/hr | 60–180 gpm, 13.6–40.8 m³/hr |
Temperature, maximum | 350 ˚F (177 ˚C) | 350 ˚F (177 ˚C) | 350 ˚F (177 ˚C) |
Pressure, maximum | 300 psi (21 bar) | 300 psi (21 bar) | 150 psi (10.5 bar) standard |
Service Requirements Air for Actuator Drive, min |
400/800 = 60 psi at 5 cfm (4 bar @ 8.5 m³/min) 1600 = 80 psi at 5 cfm (5 bar @ 8.5 m³/min) | ||
Electrical for Controllers | Control for all three models, automated only, 110/220V, 50/60 Hz, single phase |